Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon Create Your e-mail Profile

Search





    Zone Control kilns Specifications

Standard Features.
Skutt Zone Control kilns include the Kilnmaster controller built in. other standard features include.

  • 2 year limited warranty, elements excluded.

  • Three Type K thermocouples.

  • Swing away, air cooled with box.

  • Multi-sided design

  • Stainless steel jacket

  • Sectionalized construction.

  • 2 lift handles on each section.

  • Sealed dust-free lid with floating hinge.

  • Exposed, pinned elements.

  • Reversible top and bottom slabs.

  • Strand included

  • Peep plugs

  • UL listing

Skutt Zone Control kilns are currently offered on the popular 10 and 12 sided 27 inch deep kilnMaster models shown below. additional Zone control models may be available in the future depending on the interest.


KM-1227-3ZC		 Chamber
281/8" opening
27" Deep
9.9 cu. ft.		 240V: 48 Amps
11520 Watts
208V: 48AMPS
9980 Watts*		 Cone 8, 2300o
Shpg. WT. 330 lb.
cone 5, 2185o

KM-1027ZC		 Chamber
233/8" opening
27" Deep
7.0cu.ft.		 240V: 48 AMPs
11520 Watts
208V: 48AMPS
9980 Watts*		 Cone 10, 2350o
Shpg. WT.214 lb.
Cone 6, 2250o
shpg WT. 241 lb.


KM-1027-3ZC		 Chamber
233/8" opening
27" Deep
6.4 cu. ft.		 240V: 48 Amps
11520 Watts
208V: 48AMPS
9980 Watts*		 Temperature
Cone 10, 2350o
Shpg. WT. 242 lb.
* ZC kilns are also available in 3 phase. see electrical requirements below.

envnt.jpg (4795 bytes)Optional Zone Control Accessories

  • Envirovent Downdraft Vent System
  • Furniture Kit.
    • KM-1227-3ZC and KM-1027ZC Electrical Requirements
    Model Volts Amps Watts
    Copper Wire Size
    		 Fuse / breaker size
    Receptacle
    Configuration
    KM-1027ZC** 240 48 11520 6 60 6-50
    KM-1027ZC** 208 48 9980 6 60 6-50
    KM-1027ZC 3ph** 240 29.3 11520 8 40 15-50
    KM-1027ZC 3ph*** 208 31.7 11000 8 40 15-50
    KM-1227-3ZC 240 48 11520 6

    60

    		 6-50
    KM-1227-3ZC 208 48 9980 6 60 6-50
    KM-1227-3ZC 3ph 240 29.3 11520 8 40 15-50
    KM-1227-3ZC 3ph 208 31.7 11000 8 40 15-50
    Kilnmaster Specifications
    Programmable Lag: Set maximum temperature differential form 50 to 500F
    Thermocouple Failure Control: Assures firing will continue if one or two thermocouples should fail.
    Error Override: Most error codes can be turned off for special situations.
    Delay Fairing Start: Up to 99 hours 99 minutes.
    Cone Fire Mode: Entry by cone number, 3 firing speeds, cone 022 to cone 10.
    Ramp / Hold mode: Entry by temperature, create programs form 1 to8 segments. Each segment can specify a rate of heating or cooling to a specified temperature with an optional hold, to a maximum temperature of 23500F.
    Memory: Holds up to 6 firing programs.
    Safety Features: Power failure detection, Thermocouple Failure Detection, Microprocessor Fault Detection.
    Electronic Cone Table: converts cone numbers to temperature.
    Digital Readout: Fahrenheit or Centigrade.
    Program Review: review program and current segment during firing.
    Temperature Alarm: Adjustable to desired temperature.
    Control Panel: Sealed touchpad, washable.
    Thermocouples: Three encapsulated Type K.
    Designed and manufactured in USA.