| KS Standard Features |
| · |
Sectional
design for easier moving and repair |
| · |
2 year limited warranty |
| · |
2
handles on each section |
| · |
Kiln stand
with no-mar foot pads |
| · |
Sealed
dust free lid with free floating hinge |
| · |
Peep plugs |
| · |
Owners Manual |
| · |
Reversible lid and slab |
|
KS Kilns
The KS Series is Skutt’s
manual line of kilns. The "KS" refers to the Dawson KilnSitter which comes
standard with every KS kiln.
 Additional
Accessories Available:
- Limit Timer
- Pyrometer
- KM-1 Controller
- Furniture Kit
- EnviroVent Downdraft
Vent System
The Specification Table lists all of the available models in the KS Series
along with detailed information which will help you find the model that fits
your needs best. You will notice that most of the models have an option for
a "BR", which stands for blank ring. A blank ring allows the user to increase
the height of their firing chamber by 4 1/2 inches. This ring can be added
or removed at any time however be sure to note that the addition of a BR will
significantly reduce the maximum cone temperature. A wired ring or "WR" may
be added to the KS818 and KS818P models. However, it must be installed at
the factory at the time the kiln is ordered and cannot be removed subsequently.
A "WR" does not effect the temperature capabilities of the kiln. If you would
like more detailed information. Please check the electrical specifications
sheet in the Resources section Please contact your local distributor for pricing
information. A complete list of distributors can be found in the Resources
Section
6441 SE Johnson Creek Blvd., Portland, OR 97206
Phone (503)
774-6000 Fax (503) 774-7833
|
