Skutt Kiln - Optional equipment and Kiln Accessories to customize your kiln.


	Create Your e-mail Profile	Search

Skutt GlassMaster Kiln Upgrades and Accessories

Optional equipment to customize your kiln.

*Skutt GlassMaster Kilns*
New Rolling Stand	At just about every glass show we attend we receive requests for adjustable glass kiln stands. We now have them available for the GM1414 and the GM22CS kilns. These stands are specifically designed to fit each model and are constructed of tough welded steel tubing so you know they are safe. Details ::

GM-2 LT 120V Controller Upgrade	Have you ever wondered if you can upgrade your little switch operated 120V glass kiln? We had plenty of people ask us which is why we developed the GM-2 LT Controller. It is perfect for the artist that purchased a little manual kiln such as the Skutt FireBox 8, Evenheat Hot Box or the Paragon Caldera, and now wants a little more control over the firing. Details ::

EnviroVent 2 Downdraft Ventilation System .	The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent them outdoors before they have a chance to enter the room. Because it is a DownDraft Ventilation System the EnviroVent 2 also improves the firing atmosphere in the kiln while it is protecting you from the odorous fumes that can be emitted from certain clay bodies and glazes when they are fired. Ask your distributor how to get one for your kiln today. Details ::

The Skutt EnviroLink	WHAT IS THE ENVIROLINK? The EnviroLink is an electrical switching device that can be controlled by an automatic kiln to deter-mine when a vent turns on and off. The EnviroLink was developed by engineers at Skutt to provide kiln owners with the ability to automatically control the Skutt EnviroVent and EnviroVent 2. The device utilizes a programmable power output (OUTPUT 4) on Skutt KilnMaster and GlassMaster Controllers to turn on/off the EnviroVent and EnviroVent 2. The kiln may be programmed to control the vent during any segment of a Ramp/Hold Program or during preset times of a ConeFire or Glass Fire Mode program. Details ::

Optional Quartz Viewing Window	Skutt now offers a new Viewing Window for their glass kilns. This is available on GM22CS kilns and GM1414 Kilns as an optional upgrade. They are made out of polished Quartz to withstand the heat and have a unique double-conical cavity back for a wider viewing area. It can be ordered with a new kiln or as an upgrade for existing kilns. It is available now for ordering at any Skutt Distributor. Details ::

GM1414 with Optional Spring assisted Lid lifter	Skutt now offers a new spring assisted lid lifter for the GM1414 Oval kiln. It is an optional upgrade that can be ordered with a new kiln or, as a retrofit kit for an existing kiln. The lid braces have been redesigned with a unique cam system to prevent catching. The 3 position lid prop has 2 venting positions and a lock position. The spring assist not only helps to lift the extremely heavy GM1414 lid, it also puts less stress on the lid so it will last longer. Details ::

Pyrometer	If you are ordering a KilnSitter kiln you may want to equip it with a Skutt Analog Pyrometer. A pyrometer will let you know what the temperature of the kiln chamber is throughout the entire firing. This is especially helpful to know when you are firing glass, heat treating metal or troubleshooting your kiln. The pyrometer comes complete with a MI Cable Type K thermocouple and all the mounting hardware needed. 0-2500F type K thermocouple with wall mounted meter Details ::

Energy-saving 3" brick	• Recommended for high-fire models. • Comes standard on 1627, 1227, and 614 models. • Remember this will decrease the chamber size on some models by 1². • 3² brick will increase the temperature rating on some models. • Kilns will cool slower. Details ::

Furniture Kit Triangular Posts and Shelves	A furniture kit is used to create shelf layers inside your kiln. Although the contents of shelf kits vary depending on the kiln model all shelf kits will contain a selection of shelves and 1 or more post assortment kits. Furniture kits for kilns with 8 sides or less will come with 18 posts, 3 each in lengths 1² thru 6². Kits for larger kilns will come with 36 posts. All furniture kits are designed to fire to Cone 10 temperatures. Details ::

KM Models
Zone Control	The Zone Control feature was designed for users who require tight uniformity of heat throughout the kiln. This feature incorporates thermocouples in each kiln section so each section can be monitored and controlled independently. This can be very helpful for applications where it is not possible to load the kiln evenly. The increased control can extend firing times in certain situations. Consult your distributor for more details. Details >>>

Computer Interface System (C.I.S.)	This system allows you to program, monitor and graph the firings of up to 10 KilnMaster controlled kilns using a PC. Installation is simple and quick. The system includes a CD with the software and all of the necessary hardware to connect your computer to the KM controller. REQUIREMENTS • Microsoft Windows 95 or Microsoft Windows NT 3.51 or later • 80386 or higher microprocessor • VGA or higher-resolution screen supported by Microsoft Windows • 4 MB of RAM • 5 MB of disk space Details >>>


	www.skutt.com Terms of Use Privacy Statement Contact skutt		Site Feedback
	© Copyright 1994-2009 Skutt Ceramics, Inc. All rights reserved.